sorensen-engineered-systems HOME   I   ABOUT US   I   NEWS   I   SITE MAP   I   CONTACT   I   REQUEST QUOTE   


    < Back to Custom Systems 



The Francis turbine with wicket gates will generate an average of 1.2 million kWh per year.


The 200 kW, 480 VAC, 3PH, 60 Hz, 727 rpm induction generator was manufactured by Marelli Motori


The custom built Turbine Control Panel used Allen-Bradley SLC500 PLC and Panelview Plus HMI.


Sorensen Systems Design/Builds and
Installs Innovative Hydroelectric Plant

With each glass of fresh, clean water drawn from a water tap in Boston, consumers are helping to generate electricity that goes back into the grid at a rate that will power the energy needs of over 100 homes. As the water flows from reservoirs in the western part of the state, a unique hydraulic turbine and hydroelectric generator combine to generate enough electricity to operate an MWRA storage facility, with left-over electricity sent back into the grid.

Micro Hydro

This Micro electric power generator is one of many innovative installations being installed around the state of Massachusetts to meet the goal of getting at least 15 percent of its annual electricity requirements from renewable sources by 2012. According to an article in the Boston Globe, Frederick Laskey, executive director of the water agency said, "It basically helps get us off the roller coaster of utility bills. The more we can self-generate, the less vulnerable we are to the peaks and valleys of the energy commodities market," he added.

Gravity sends the water to Boston from the Quabbin Reservoir and the Wachusett Reservoir, which becomes pressurized as it travels via aqueducts to a treatment plant about 30 miles west of Boston. From there it travels to a network of tanks that depressurize and store the drinkable water before it is distributed to Boston and other communities. It's here at the storage facility that the magic happens.

Loring Road Facility

At the Loring Road facility in Massachusetts, the potable water now moves through the recently installed hydroelectric turbine, which reduces the gravity-fed pressure from the water and converts it to electric energy. By by-passing the pressure reducing valves with a 200 kW turbine-generator unit, instead of dissipating the energy with the sleeve valves, it is converted into electricity. The compact horizontal Francis turbine with wicket gates will generate an average annual 1.2 million kWh.

The storage tanks at the Loring Road facility were constructed to protect and store treated drinking water in compliance with the Federal Safe Drinking Water Act. The storage tanks replaced a 100 year old system of open reservoirs. The covered tanks protect drinking water from potential contamination. The two reservoirs that feed into the Loring Road facility supply an average of 200 million gallons per day to consumers.

Sorensen Builds System

The Sorensen Systems company of Northborough MA designed and built the turbine-generator systems used at the Loring Road facility by the MWRA. According to Riccardo Ricci, Project Manager from Sorensen Systems, the purpose of the project was to meet the requirement by the MWRA to recover the energy previously lost through the power reducing sleeve valves. Ricci explained that as the water passes through the turbine the pressure is reduced and the energy is transferred into electric power via the induction generator connected to the turbine water wheel, or runner.

"The electric power generated through this process is used to power the equipment in the vault, with the balance exported back to the utility for revenue," said Ricci.

Sorensen Systems design engineers and technicians were responsible for overall project management to include the turbine generator, the hydraulic power unit, the turbine circuit breaker, the turbine control panel, the Francis turbine unit, the induction motor and the large butterfly valves and piping.

Some of the systems for which the company was responsible included:

  • Turbine/Generator Assembly

    • James Leffel and Co. horizontal Francis Turbine, base frame, inlet expansion box, draft tube section, Marelli Motori induction generator

  • Penstock & Draftube Hydraulic
    Actuated Butterfly Valves

    • 30 inch AWWA C-504 Butterfly Valves by
      Val-Matic Valve
    • Hydraulic Actuator (double acting scotch yoke)
      by Rotork Fluid System

  • Inlet & Outlet Electric Actuated
    Butterfly Valves

    • 30 inch AWWA C-504 Butterfly Valve by
      Val-Matic Valve
    • Electric Actuator by AUMA Actuators Inc

  • Hydraulic Power Unit Assembly

    • Custom built by Sorensen Systems using Parker Hannifin hose, fittings, filtration and manifolds

  • Circuit Breaker Panel

    • Custom built by Sorensen Systems using Eaton Magnum DS circuit breaker and Balser GPS-100 multifunction protective relay

  • Turbine Control Panel

    • Custom built by Sorensen Systems using Allen-Bradley SLC500 PLC and Panelview Plus HMI

  • SCADA Panel

    • Custom built by Sorensen Systems to provide
      remote control capability

  • UPS Panel

    • Custom built by Sorensen Systems using APC-Smart UPS (uninterruptable power system) with extended time battery packs




Sorensen Systems

A Subsidiary of THG Corporation
70 Bearfoot Road
Northborough, MA 01532

T: 508-393-7660
F: 508-393-6042


  Who Knew that Pink
Meant Hydraulics?

When the specification said the machine was to be painted pink, who knew there was more than one pink? Pink Hydraulic Power Units

  Read Mike's Best
Online Tool Links

Our VP of Engineering has some
favorite online conversion tools
that you may find useful.
Mike's Conversion Tools
  Our Engineers Comment
On Topics of Interest

Each month our engineers take up a topic and add their insight. It can range from motion control to electricity cost. Sorensen Blog.
  Sorensen Engineered Systems
Division of Sorensen Systems

70 Bearfoot Road
Northborough, MA 01532

  Phone: 508-393-7660
Fax: 508-393-8203
Email • Terms & Conditions • Disclaimer • Jobs • Our Mission
© 2018, Sorensen Systems. All rights reserved